Pultruded profile spec sheet template
A spec sheet template for pultruded FRP/GRP profiles that fills itself from your section. Upload a profile's cross-section and Dimviz generates the 3D figure, the dimensioned drawing, weight per metre and the complete section-property table — in one consistent layout you can roll out across an entire catalogue. A live example is below.
| Area | A | 3552 mm² |
| Weight | m | 6.75 kg/m |
| 2nd moment | Ix | 1.819e+7 mm⁴ |
| Section mod. | Sx | 181929 mm³ |
| Gyration | rx | 71.6 mm |
| Material | FRP · Grey | |
- ◆Profile designation
- ◆3D figure + dimensioned section
- ◆Material & EN 13706 grade
- ◆Weight per metre
- ◆Area, Ix, Iy, Sx, Sy
- ◆Radii of gyration & torsion
- ◆Corrosion / temperature notes
One template, a whole catalogue
Pultruded ranges run to dozens of sizes. Filling a spec sheet by hand per size invites errors and drift. Generating each from the same template — figure, drawing and numbers from geometry — keeps the catalogue consistent and correct.
The numbers engineers check
Weight per metre, section moduli and radii of gyration decide whether a profile fits a load case. Dimviz computes them exactly from the section, so the spec sheet is decision-ready, not just decorative.
FAQ
What's on a pultruded profile spec sheet?+
Designation, a figure and dimensioned section, material and grade, weight per metre, and section properties (area, Ix, Iy, Sx, Sy, radii of gyration, torsion), plus corrosion and temperature notes.
Does it work for the whole range?+
Yes — generate a spec sheet per size from the same template so the range is consistent. Batch export is a Pro feature.
Where do the numbers come from?+
They're computed from the section geometry you upload, using exact polygon integration — the same math a structural engineer uses.